Intel VIA K8T800, Руководство пользователя

Страница: 39 / 92

BIOS
Page 4-5
Swap Floppy Drive
This will swap your physical drive letters A & B if you are using two floppy disks.
Options: Enabled, Disabled.
Boot Up NumLock Status
This controls the state of the NumLock key when the system boots. The default is On.
On : The keypad acts as a 10-key pad.
Off : The keypad acts like cursor keys.
Typematic Rate Setting
This determines the keystrokes repeat rate. The default is Disabled.
Enabled : Allows typematic rate and typematic delay programming.
Disabled : The typematic rate and typematic delay will be controlled by the keyboard
controller in your system.
Typematic Rate (Chars/Sec)
This is the number of characters that will be repeated by a keyboard press. The
default is 6.
Options: 6 ~ 30 characters per second.
Typematic Delay (msec)
This setting controls the time between the first and the second character displayed
by typematic auto-repeat. The default is 250.
Options: 250/500/750/1000 msec.
Gate A20 Option
This refers to the way the system addresses memory above 1 MB (extended memory).
Normal : The A20 signal is controlled by the keyboard controller or chipset
hardware.
Fast : The A20 signal is controlled by Port 92 or chipset specific method.
Security Option
This category allows you to limit access to the System and Setup, or just to Setup.
System : The system will not boot and the access to Setup will be denied if the
correct password is not entered at the prompt.
Setup : The system will boot; but the access to Setup will be denied if the
incorrect password is not entered at the prompt.