Intel SR1475NH1-E, Руководство пользователя

Страница: 30 / 90

14 Intel
®
Server Board SE7230NH1-E and Intel
®
Server Platform SR1475NH1-E User’s Guide
Installing DIMMs
To install DIMMs, follow these steps:
1. Observe the safety and ESD precautions in “Safety Information” .
2. Turn off all peripheral devices connected to the server. Turn off the server.
3. Disconnect the AC power cord from the server.
4. Remove the server's cover. See the documentation that came with your server chassis
for instructions on removing the server's cover.
5. Locate the DIMM sockets (see Figure 4 ).
Figure 4. Installing DIMMs
6. Make sure the clips at either end of the DIMM socket(s) are pushed outward to the
open position (see letter “A” in Figure 4 ).
7. Holding the DIMM by the edges, remove it from its anti-static package.
8. Position the DIMM above the socket. Align the notch on the bottom edge of the
DIMM with the key in the DIMM socket (see letter “B” in Figure 4 ).
9. Insert the bottom edge of the DIMM into the socket (see letter “C” in Figure 4 ).
10. When the DIMM is inserted, push down on the top edge of the DIMM until the
retaining clips snap into place. Make sure the clips are firmly in place (see letter “D”
in
Figure 4 ).
11. Replace the server's cover and reconnect the AC power cord. See the documentation
that came with your server chassis for instructions on installing the server's cover.
TP01784
DIMM 2B
Socket DIMM 1A
Socket
DIMM 2A
Socket
DIMM 1B
Socket
Bank 1
Bank 2
A
C
D
B