manualshive.com logo in svg

Intel SE7210TP1, Руководство пользователя

Поделиться
Скачать
Intel SE7210TP1 Скачать руководство пользователя страница 41

Troubleshooting 

If you are using an add-in video controller board, do the following: 

 

1.

 

Verify that the video works using the onboard video controller. 

2.

 

Verify that the video controller board is fully seated in the server board connector. 

3.

 

Reboot the system for changes to take effect. 

4.

 

If there are still no characters on the screen after you reboot the system and POST emits a beep 
code, write down the beep code you hear.  This information is useful for your service 
representative. 

5.

 

If you do not receive a beep code and characters do not appear, the video display monitor or 
video controller may have failed.  Contact your service representative or authorized dealer 
for help. 

Characters Are Distorted or Incorrect 

Check the following: 

‰

 

Are the brightness and contrast controls properly adjusted on the video monitor?  See the 
manufacturer’s documentation. 

‰

 

Are the video monitor’s signal and power cables properly installed? 

‰

 

Does this video monitor work correctly if plugged into a different system? 

System Cooling Fans Do Not Rotate Properly 

If the system cooling fans are not operating properly, it is an indication of possible system 
component failure. 

Check the following: 

‰

 

Is the power-on light lit? If not, see “

Power Light Does Not Light

” 

‰

 

If your system has LED lights for the fans, is one or more of these LEDs lit? 

‰

 

Are any other control panel LEDs lit? 

‰

 

Have any of the fan motors stopped? Use the server management subsystem to check the fan 
status. 

‰

 

Have your fans speeded up in response to an overheating situation? 

‰

 

Have your fans speeded up in response to a fan that has failed? 

‰

 

Are the fan power connectors properly connected to the server board? 

‰

 

Is the cable from the control panel board connected to the both the control panel board and to 
the server board? 

‰

 

Are the power supply cables properly connected to the server board? 

‰

 

Are there any shorted wires caused by pinched-cables or have power connector plugs been 
forced into power connector sockets the wrong way? 

Intel Server Board SE7320SP2 / SE7525GP2 User Guide 

41 

Содержание SE7210TP1





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды