Intel SE7210TP1 Скачать руководство пользователя страница 4

Страница: 4 / 60

Additional Information and Software

If you need more information about this product or information about the accessories that can be
used with this server board, use the following resources. These files are available at

http://support.intel.com/support/motherboards/server/SE7320SP2/

Unless otherwise indicated in the table below, once on this Web page, type the document or
software name in the search field at the

left

side of the screen and select the option to search “This

Product.”

For this information or software

Use this Document or Software

For in-depth technical information
about this product, including BIOS
settings and chipset information

Technical Product Specification

If you just received this product and
need to install it

Intel® Server Board

SE7320SP2 Quick Start User’s Guide in the product box

Intel® Server Board

SE7525GP2 Quick Start User’s Guide in the product box

For virtual system tours and
interactive repair information

A link to the SMaRT Tool is available under “Other Resources” at the right side
of the screen at

http://support.intel.com/support/motherboards/server/SE7320SP2/

and

http://support.intel.com/support/motherboards/server/SE7320SP2/

Accessories or other Intel server
products

Spares and Configuration Guide

Hardware (peripheral boards,
adapter cards) and operating
systems that have been tested with
this product

Tested Hardware and Operating System List

Chassis that have been tested with
this product

Reference Chassis List

Processors that have been tested
with this product

Supported Processors

DIMMs that have been tested with
this product

Supported Memory

To make sure your system falls
within the allowed power budget

Power Budget

For software to manage your Intel

server

Intel Server Management

For drivers

Driver (for an extensive list of drivers available)

Operating System Driver (for operating system drivers)

For firmware and BIOS updates

Firmware Update

For diagnostics test software

Diagnostics

Intel Server Board SE7320SP2 / SE7525GP2 User Guide

Содержание SE7210TP1





























































Результаты поиска

Содержание SE7210TP1

Отзывы:

Бренды по названию

Популярные бренды

Intel SE7210TP1, Руководство пользователя

Результаты поиска

Содержание SE7210TP1

Отзывы:

Бренды по названию

Популярные бренды