manualshive.com logo in svg

Intel SC5650-DP, Руководство по обслуживанию

Поделиться
Скачать
Intel SC5650-DP Скачать руководство пользователя страница 54

Hardware Installations and Upgrades

36

Intel

®

 

Chassis SC5650-DP/WS/BRP/UP Service Guide

6. If reinstalling a new CD-ROM or DVD-ROM drive, see 

“Installing a DVD-ROM or 

CD-ROM Drive”

 for instructions. If not replacing the drive, reinstall the EMI shield 

and front bezel filler panel, if available.

Figure 39.  Installing 5.25-in Drive EMI Shield (DP/WS/BRP configuration shown)

7. Reinstall the front bezel assembly. For instructions, see 

“Installing the Front Bezel 

Assembly”

.

8. Reinstall the chassis cover. For instructions, see 

“Installing the Left Side Cover”

.

9. Reconnect all peripheral devices and the AC power cable(s). Power up the server.

Installing and Removing PCI Add-in Boards

The following instructions describe how to install and remove a PCI add-in board in the 
Intel

® 

Server Chassis SC5650. These instructions depend on the server board. See your 

server board documentation to determine PCI add-in board compatibility.

Caution: Do not overload the server board by installing add-in boards that draw excessive current.

Caution: PCI add-in boards can be extremely sensitive to electric static discharge (ESD) and 

always require careful handling. After removing the add-in board from its protective 
wrapper or from the server board, place it component side up on a grounded, static-free 
surface or conductive foam pad. Do not slide the add-in board over any surface.

Installing PCI Add-in Boards

Note: Before installing any PCI add-in boards, you may want to install an operating system.

1. Observe the safety and ESD precautions listed in 

Appendix A, “Safety Information”

. 

2. Power down the server and unplug all peripheral devices and the AC power cable.

TP02048

Содержание SC5650-DP















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды