Intel SC5650-DP Скачать руководство пользователя страница 28

Страница: 28 / 174

Server Chassis Features

Intel

Server Chassis SC5650-DP/WS/BRP/UP Service Guide

Note: Drives can consume up to 18.4 watts of power each. Drives must be specified to run at a

maximum ambient temperature of 45C.

Note: The Intel

Server Chassis SC5650 does not support all Serial ATA hard drives. See

“Additional Information and Software”

for a web link to a list of supported hardware.

Front Bezel Assembly

The front bezel assembly provides a snap-on design that allows for maximum airflow
through the server chassis.

All configurations of the server chassis ship with a two-piece front bezel assembly.

Rack-Mounted Systems

Your Intel

Server Chassis SC5650 can be optionally mounted into a rack. Instructions for

installing your chassis into a rack are included with the rail kit.

The order number for the rack mounting kit is APP3RACKIT.

Содержание SC5650-DP















































































































































































Результаты поиска

Содержание SC5650-DP

Отзывы:

Бренды по названию

Популярные бренды

Intel SC5650-DP, Руководство по обслуживанию

Результаты поиска

Содержание SC5650-DP

Отзывы:

Бренды по названию

Популярные бренды