Intel SBXD62 - Server Compute Blade, Инструкция по установке и эксплуатации

Страница: 61 / 118

Intel® Server Compute Blade SBXD62 Installation and User’s Guide 51
Light Path Diagnostics
If the system-error LED on the system LED panel on the front or rear of the Intel® Blade
Server Chassis SBCE is lit, one or more error LEDs on the components also might be lit.
These LEDs help identify the cause of the problem.
Diagnosing Problems Using Light Path Diagnostics
This section provides information about using the light path diagnostics to diagnose
problems that might occur during installation. To locate the actual component that caused
the error, locate the lit error LED on that component.
The following steps illustrate how to use the light path diagnostics to diagnose a system
error:
1. Shut down the operating system, turn off the blade server, and remove the blade server
from the Intel® Blade Server Chassis SBCE (see “Turning off the Blade Server” on
page 7 and “Removing the Blade Server from an Intel® Blade Server Chassis SBCE”
on page 17 ).
2. Place the blade server on a flat, static-protective surface.
3. Remove the cover from the blade server (see “Opening the Blade Server Cover” on
page 18 ).
4. Press and hold the light path diagnostics button to relight the LEDs that were lit
before you removed the blade server from the Intel® Blade Server Chassis SBCE.
The LEDs will remain lit for as long as you press the button, to a maximum of 25
seconds.
See “Understanding the Control Panel and LEDs” on page 8 for more information about
the control panel buttons and error LEDs.
Light Path Diagnostics LEDs
The following illustrations show the light path diagnostics panel and LEDs on the system
board.
MIS
NMI
SBRD
TEMP
NMI error LED
Microprocessor speed mismatch error LED
System-board error LED
Over temperature error LED
Light path diagnostics LED (CD111)
Light path diagnostics switch (SW4)