Intel S5000VCL - Server Board Motherboard Скачать руководство пользователя | Manualshive

Страница: 56 / 74

background image

Intel

®

Server Board S5000VCL TPS

Regulatory and Certification Information

Revision 2.3

Intel order number: D64569-007

47

9.3

Electromagnetic Compatibility Notices

9.3.1

FCC Verification Statement (USA)

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.

Intel Corporation
5200 N.E. Elam Young Parkway
Hillsboro, OR 97124-6497
Phone: 1-800-628-8686

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of these measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and the receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by the grantee of this device could void
the user’s authority to operate the equipment. The customer is responsible for ensuring
compliance of the modified product.

All cables used to connect to peripherals must be shielded and grounded. Operation with
cables, connected to peripherals that are not shielded and grounded may result in interference
to radio and TV reception.

«
...
54
55
56
57
58
...
»

Содержание S5000VCL - Server Board Motherboard











































































Отзывы:

Нет отзывов

Похожие инструкции для S5000VCL - Server Board Motherboard

eServer BladeCenter HS20Type 8832

Бренд: IBM Страницы: 158

Adaptive Server IQ 12.4.2

Бренд: Sybase Страницы: 536

Бренд: Edimax Страницы: 93

Бренд: Novell Страницы: 152

ZENWORKS PATCH MANAGEMENT 6.4 SP2 - SERVER

Бренд: Novell Страницы: 390

244857-001 - TaskSmart - C4000 Model 60_duplicate

Бренд: Compaq Страницы: 9

SUPERSERVER 1017GR-TF

Бренд: Supero Страницы: 100

Бренд: Avaya Страницы: 84

Бренд: TAG Страницы: 84

Edgeline EL4000

Бренд: HPE Страницы: 57

ProLiant ML110 Gen10

Бренд: HPE Страницы: 101

ProLiant ML110 Gen10

Бренд: HPE Страницы: 159

Бренд: Alfresco Страницы: 49

9000 APPLIANCE SERIES

Бренд: Arcserve Страницы: 14

Бренд: EEG Страницы: 32

Бренд: Inspur Страницы: 2

Бренд: YASKAWA Страницы: 21

Бренд: AMX Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды