Intel S5000PSL, Руководство пользователя, Страница: 80 / 88

62 Intel
®
Server Board S5000PSL
The add-in adapter stopped working without apparent cause
•
Reseat the adapter.
•
Put the adapter in a different slot.
•
The network driver files may be corrupt or deleted. Delete and then reinstall the
drivers.
•
Run diagnostics.
System Boots when Installing PCI Card
System management features require full-time “standby” power. This means some parts of
the system have power going to them whenever the power cord is plugged in, even if you
have turned the system power off with the power button on the front panel. If you install a
PCI card with the AC power cord plugged in, a signal may be sent to command the system
to boot. Before installing a PCI card, you should always:
•
Turn off the server power by using the power button on the front of the system.
•
Unplug the AC power cord(s) from the server.
Problems with Newly Installed Application Software
Problems that occur when you run new application software are usually related to the
software, not the server hardware. Faulty equipment is unlikely, especially if other
software runs correctly.
Check the following:
•
Make sure the system meets the minimum hardware requirements for the software.
See the software documentation.
•
Make sure the software is properly installed and configured for the system. See the
software documentation.
•
Use only an authorized copy. Unauthorized copies often do not work.
•
If you are running the software from a USB floppy disk, CD-ROM or DVD-ROM,
try a different disk.
•
Make sure the correct device drivers installed.
If the problems persist, contact the software vendor's customer service representative.