Intel S4600LT2, Технические характеристики продукции

Страница: 35 / 126

Intel® Server System R2000LH2/T2 Product Family TPS Power Subsystem
Revision 1.0 23
Table 12. AC Line Surge Transient Performance
AC Line Surge
Duration Surge Operating AC Voltage Line Frequency Performance Criteria
Continuous 10% Nominal AC Voltages 50/60 Hz No loss of function or
performance
0 to 1/2 AC
cycle 30% Mid-point of nominal AC
Voltages 50/60 Hz No loss of function or
performance
3.5.8 Susceptibility Requirements
The power supply meets the following electrical immunity requirements when connected to a
cage with an external EMI filter that meets the criteria defined in the
SSI document EPS Power
Supply Specification . For further information on Intel standards, request a copy of the Intel
Environmental Standards Handbook .
Table 13. Performance Criteria
Level Description
A The apparatus shall continue to operate as intended. No
degradation of performance.
B The apparatus shall continue to operate as intended. No
degradation of performance beyond spec limits.
C Temporary loss of function is allowed provided the
function is self-recoverable or can be restored by the
operation of the controls.
3.5.9 Electrostatic Discharge Susceptibility
The power supply complies with the limits defined in EN 55024: 1998/A1: 2001/A2: 2003 using
the IEC 61000-4-2: Edition 1.2: 2001-04 test standard and performance criteria B defined in
Annex B of CISPR 24 .
3.5.10 Fast Transient/Burst
The power supply complies with the limits defined in EN55024: 1998/A1: 2001/A2: 2003 using
the IEC 61000-4-4: Second edition: 2004-07 test standard and performance criteria B defined in
Annex B of CISPR 24 .
3.5.11 Radiated Immunity
The power supply complies with the limits defined in EN55024: 1998/A1: 2001/A2: 2003 using
the IEC 61000-4-3: Edition 2.1: 2002-09 test standard and performance criteria A defined in
Annex B of CISPR 24 .
3.5.12 Surge Immunity
The power supply is tested with the system for immunity to AC Unidirectional wave; 2kV line to
ground and 1kV line to line, per
EN 55024: 1998/A1: 2001/A2: 2003 , EN 61000-4-5: Edition
1.1:2001-04 .
The pass criteria include: