Intel QX68000 Core 2 Extreme страница 10 Скачать руководство пользователя

Страница: 10 / 123

LGA775 Socket Heatsink Loading

Thermal and Mechanical Design Guidelines

1.1.3

Document Scope

This design guide supports the following processor:

•

Intel

Core™2 Extreme processor QX6800 B3 Stepping

•

Intel

Core™2 Extreme processor QX9770 C0 Stepping

In this document when a reference is made to “the processor” it is intended that this

includes all the processors supported by this document. If needed for clarity, the

specific processor will be listed.

In this document, when a reference is made to “the datasheet”, the reader should

refer to the Intel

Core™2 Extreme Processor QX9000 Series and Intel

Core™2 Quad

Processor Q9000 Series Datasheet and Intel

Core™2 Extreme Quad-Core Processor

QX6000

Sequence and Intel

Core™2 Quad Processor Q6000

Sequence Datasheet,

as appropriate. If needed for clarity the specific processor datasheet will be

referenced.

Chapter

2 of this document discusses package thermal mechanical requirements to

design a thermal solution for the processor in the context of personal computer
applications. Chapter

3 discusses the thermal solution considerations and metrology

recommendations to validate a processor thermal solution.
Chapter

4 addresses the benefits of the processor’s integrated thermal management

logic for thermal design.

Chapter

5 gives information on the Intel reference thermal solution called ALCT (Intel

Advanced Liquid Cooling Technology) for the processor. Chapter

6 discusses the

implementation of Intel

Quiet System Technology.

The physical dimensions and thermal specifications of the processor that are used in

this document are for illustration only. Refer to the datasheet for the product

dimensions, thermal power dissipation and maximum case temperature. In case of

conflict, the data in the datasheet supersedes any data in this document.

Содержание QX68000 Core 2 Extreme




























































































































Результаты поиска

Содержание QX68000 Core 2 Extreme

Отзывы:

Похожие инструкции для QX68000 Core 2 Extreme

Бренды по названию

Популярные бренды

Intel QX68000 Core 2 Extreme, Руководство по конструкции

Результаты поиска

Содержание QX68000 Core 2 Extreme

Отзывы:

Похожие инструкции для QX68000 Core 2 Extreme

Бренды по названию

Популярные бренды