2
Orient the processor (A) so that the heatsink (B) faces the DIMM slots. Slide the
processor into the retention mechanism (E) ensuring that the Dual Retention
Mechanism (DRM) top screw holes align with the retention mechanism screw holes.
Press down firmly until the processor is seated in the processor connector (G). Secure
the DRM top (D) to the retention mechanism (E) using the appropriate screws (C). If
this is a single processor system, install the termination card in the connector labeled P1
(L). Once the termination card is installed in the connector labeled P1 (L), secure the
DRM top (D) to the retention mechanism using the appropriate screws (C).
DIMM Slots
OM08285X
B
E
D
E
A
C
C
