3
To install a second processor, remove any termination card located in the processor
connector labeled P1. Orient the second processor (A) so that the heat sink (B) faces
the DIMM slots. Slide the processor into the processor retention mechanism (E).
Press down firmly until it is seated in the processor connector labeled P1. Secure the
DRM top (D) to the retention mechanism (E) using the appropriate screws (C).
D
C
E
G
A
B
E
DIMM Slots
OM08284X
P0 connector
L
P1
connector
Second Edition September 1998
Part Number 724352-001
