Intel Pentium II OverDrive, Руководство по установке

Страница: 27 / 32

27
English
J1
JP1
1 2 3 4 5
J 1
J P 1
PC-3847
You need to set jumpers or switches to configure your computer
for the Pentium II OverDrive processor (Continued).
Jumpers are very small pins fastened to the motherboard. If you
look closely, you can see that each jumper is labelled with a number
or letter that typically is printed on the motherboard, as shown
below.
The pins are connected (ON) when a tiny plastic connector covers
two pins. The connector has a metal piece embedded in the plastic
that allows current to pass between the pins.
To turn the connection OFF, remove the jumper connector from the
pins. You can also place the connector over only one of the pins for
safekeeping as shown. To turn the connection ON, place the
connector over the two indicated pins. Note that while some
jumpers appear in pairs, others may appear in sets of four or more,
as shown.