Intel NetportExpress 10, Руководство по установке

Страница: 5 / 39

3
1 Connect the network cable to the RJ-45 or DB-9 connector. If you are
using an RJ-45 jack, use Type 3 cable.
2 Plug the power cable into the print server.
3 Connect the printer cable to the printer and the print server.
After connecting the power cable, wait one minute. When the activity light is
solid green, the NetportExpress print server is ready to be configured. Press the
Test Page button to send a test page to the printer connected to parallel port 1.
The test page includes the print server’s Device ID, IP address, and other
configuration information. If you cannot print a test page, see
Can’t print a test
page on page 26 .
Install NetportExpress PRO token ring
print server
PARALLEL 1
PARALLEL 2
SERIAL
Activity
Transm
it
Receiv
e
NetportExpress PRO
TM
DB-9
PO
WER
RJ-45
DIA
G
1 2
3-port
2
3 1