Intel NetportExpress 10, Руководство по установке

Страница: 13 / 39

11
Set up PCs to print
Windows NT 4.0, Windows 2000, Windows 98, or Windows 95: Run the
Windows Add Printer Wizard and set up a network printer, selecting the print
queue.
Windows NT 3.51, Windows 3.1x, or DOS : Redirect printing to the print queue.
For more information, see Novell printing in the Online Guide index.
Setting up to print with NDPS
To set up printing with NDPS, you need to configure the NetportExpress print
server and create an NDPS Broker, an NDPS Manager, and NDPS Printer
Agents.
Important: For proper printing with NetWare 5, apply Novell’s Support Pack 2 or newer,
available from Novell’s Web site (http://support.novell.com).
Configure the NetportExpress print server
1 Start Netport Manager and select the print server. Match the Device ID in
Netport Manager with the Device ID located on the bottom of the print
server. If the device is not listed, see
Troubleshooting on page 21.
2 Click the Config Wizard button.
3 Follow the directions in the wizard to set an IP address.
Create an NDPS Broker
1 Open NetWare Administrator (NWAdmin) and select the appropriate
container for the new NDPS Broker object.
2 Choose Object and then choose Create.
3 Choose NDPS Broker.
4 Type a Broker name.
5 Browse to select a volume for the NDPS Resource database.
6 Click Create.
Note: Typically you need only one NDPS Broker, one NDPS Manager for each file server,
and as many NDPS Printer Agents as there are actual printers attached to the
network. You must create an NDPS Manager for each file server.