Intel L5310 - Cpu Xeon Quad-Core Lv 1.6Ghz Fsb1066Mhz 8M Fc-Lga6 Tray, Техническое описание

Страница: 16 / 114

Dual-Core Intel® Xeon® Processor 5200 Series Electrical Specifications
16
Twenty two lands are specified as V
TT
, which provide termination for the FSB and
provides power to the I/O buffers. The platform must implement a separate supply for
these lands which meets the V
TT
specifications outlined in Table 2-12 .
2.3 Decoupling Guidelines
Due to its large number of transistors and high internal clock speeds, the Dual-Core
Intel® Xeon® Processor 5200 Seriesis capable of generating large average current
swings between low and full power states. This may cause voltages on power planes to
sag below their minimum values if bulk decoupling is not adequate. Larger bulk storage
(C
BULK
), such as electrolytic capacitors, supply voltage during longer lasting changes in
current demand by the component, such as coming out of an idle condition. Similarly,
they act as a storage well for current when entering an idle condition from a running
condition. Care must be taken in the baseboard design to ensure that the voltage
provided to the processor remains within the specifications listed in
Table 2-12 . Failure
to do so can result in timing violations or reduced lifetime of the component. For further
information and guidelines, refer to the appropriate platform design guidelines.
2.3.1 V
CC
Decoupling
Vcc regulator solutions need to provide bulk capacitance with a low Effective Series
Resistance (ESR), and the baseboard designer must assure a low interconnect
resistance from the regulator (EVRD or VRM pins) to the LGA771 socket. Bulk
decoupling must be provided on the baseboard to handle large voltage swings. The
power delivery solution must insure the voltage and current specifications are met (as
defined in
Table 2-12 ). For further information regarding power delivery, decoupling
and layout guidelines, refer to the appropriate platform design guidelines.
2.3.2 V
TT
Decoupling
Bulk decoupling must be provided on the baseboard. Decoupling solutions must be
sized to meet the expected load. To insure optimal performance, various factors
associated with the power delivery solution must be considered including regulator
type, power plane and trace sizing, and component placement. A conservative
decoupling solution consists of a combination of low ESR bulk capacitors and high
frequency ceramic capacitors. For further information regarding power delivery,
decoupling and layout guidelines, refer to the appropriate platform design guidelines.
2.3.3 Front Side Bus AGTL+ Decoupling
The Dual-Core Intel® Xeon® Processor 5200 Series integrates signal termination on
the die, as well as a portion of the required high frequency decoupling capacitance on
the processor package. However, additional high frequency capacitance must be added
to the baseboard to properly decouple the return currents from the FSB. Bulk
decoupling must also be provided by the baseboard for proper AGTL+ bus operation.
Decoupling guidelines are described in the appropriate platform design guidelines.