Intel JBOD 2000 Family Скачать руководство пользователя страница 12

Страница: 12 / 63

Product Family Overview

Intel® Storage Server System JBOD 2000 Family Hardware Guide

Revision 1.42

Product Family Overview

This generation of Intel

Storage Server System JBOD 2000 Family offers a variety of options to

meet the configuration requirements of high-density high-performance computing environments.
The Intel

Storage Server System JBOD 2000 Family is comprised of three product offerings.

Note: The following table lists features common to the Intel

Storage Server System JBOD 2000

Family. Features that are unique to one product in the family are identified by denoting the full
JBOD Product Code name.

Table 1. System Feature Set

Intel

Storage Server System JBOD

2000 Family

Description

JBOD2224S2DP

2U JBOD supports 24 x 2.5” drives, with a dual-port backplane.

JBOD2312S2SP

2U JBOD supports 12 x 3.5” drives, with a single-port backplane.

This chapter provides a high-level overview of the Intel

Storage Server System JBOD 2000

Family features and available options as supported in different JBOD SKUs. Greater detail for
each major system component or feature is provided in the following chapters.

Figure 1. 24 x 2.5” Drive JBOD 2000 Product Drawing

Содержание JBOD 2000 Family
































































Результаты поиска

Содержание JBOD 2000 Family

Отзывы:

Похожие инструкции для JBOD 2000 Family

Бренды по названию

Популярные бренды

Intel JBOD 2000 Family, Руководство по оборудованию

Результаты поиска

Содержание JBOD 2000 Family

Отзывы:

Похожие инструкции для JBOD 2000 Family

Бренды по названию

Популярные бренды