Intel JBOD 2000 Family, Руководство по оборудованию

Страница: 25 / 63

Intel® Storage Server System JBOD 2000 Family Hardware Guide System Storage and Peripheral Drive Bays Overview
Revision 1.42 15
3.2 3.5” Hard Disk Drive Support
The server is available in 3.5” hard disk configurations of 12 drives as illustrated below.
Figure 16. 3.5” Hard Drive Bay – 12-Drive Configuration
The drive bay can support either SATA or SAS hard disk drives. Mixing of drive types within the
hard drive bay is not supported. Hard disk drive type is dependent on the type of host bus
controller used, SATA only or SAS. Each 3.5” hard disk drive is mounted to a drive tray,
allowing for hot-swap extraction and insertion. Drive trays have a latching mechanism that is
used to extract and insert the drives from the chassis, and lock the tray in place.
Figure 17. 3.5” Drive Tray Assembly
Light pipes integrated into the drive tray assembly direct the light emitted from Amber drive
status and Green activity LEDs located next to each drive connector on the backplane, to the
drive tray faceplate, making them visible from the front of the system.
Figure 18. Status and Activity LED on 3.5” Drive Tray
Table 7. Status LED Status
Amber
Off No access and no fault.
Solid on Hard drive fault has occurred.
Blink RAID rebuild in progress (1 Hz);
Identify (2 Hz).