manualshive.com logo in svg

Intel ITANIUM ARCHITECTURE - SOFTWARE DEVELOPERS VOLUME 3 REV 2.3, Руководство пользователя, Страница: 590 / 1898

Поделиться
Скачать
Intel ITANIUM ARCHITECTURE - SOFTWARE DEVELOPERS VOLUME 3 REV 2.3 Скачать руководство пользователя страница 590

2:342

Volume 2, Part 1: Processor Abstraction Layer

the virtual processor status register without any intercepts to the VMM; and the last 
value written to the vpsr will be returned, unless a fault condition is detected (see 

Table 11-35

 for details). The value returned for the fml, mfh, ac, up  and be bits are 

simply the values of those bits in the PSR of the logical processor, since those bits are 
not virtualized.

If this optimization is disabled, execution of a MOV-from-PSR instruction with 
PSR.vm==1 results in a virtualization intercept.

Synchronization is required when this optimization is enabled, see 

Table 11-34

 for 

details.

When this optimization is enabled, certain VPD state is accessed, as described in 

Table 11-16, “Virtual Processor Descriptor (VPD)” on page 2:326

.

Note:

This field cannot be enabled together with the d_psr_i virtualization disable 
control (vdc) described in 

Section 11.7.4.3.7, “Disable PSR Interrupt-bit Virtu-

alization” on page 2:348

. If this control is enabled together with the d_psr_i 

control, an error will be returned during PAL_VP_CREATE and 
PAL_VP_REGISTER. See 

Section 11.7.4.4, “Virtualization Optimization Combi-

nations” on page 2:349

 for details.

11.7.4.2.5 MOV-from-CPUID Optimization

The MOV-from-CPUID optimization is enabled by the a_from_cpuid bit in the 
Virtualization Acceleration Control (

vac

) field in the VPD. When this optimization is 

enabled, software running with PSR.vm==1 will be able to execute MOV-from-CPUID 
instruction to read the virtual CPUID registers without any intercepts to the VMM; and 
the corresponding VCPUID value from the VPD will be returned, unless a fault condition 
is detected (see 

Table 11-37

 for details).

If this optimization is disabled, execution of a MOV-from-CPUID instruction with 
PSR.vm==1 results in a virtualization intercept.

Synchronization is required when this optimization is enabled, see 

Table 11-36

 for 

details.

When this optimization is enabled, certain VPD state is accessed, as described in 

Table 11-16, “Virtual Processor Descriptor (VPD)” on page 2:326

.

Table 11-34. Synchronization Requirements for MOV-from-PSR Optimization

VPD Resource

Synchronization Required

vpsr{36:35, 31:6}
See 

Table 11-17, “Virtual Processor 

Descriptor (VPD) – VPSR” on 
page 2:328

 for details.

Write

Table 11-35. Interruptions when MOV-from-PSR Optimization is Enabled

Instructions

Interruptions

MOV-from-PSR

When the MOV-from-PSR optimization is enabled, MOV-from-PSR 
instructions with PSR.vm==1, may raise the following faults:

• Illegal Operation fault – if the target operand specifies GR 0 or 

an out-of-frame stacked register

• Privileged Operation fault – if vpsr.cpl is not zero

Содержание ITANIUM ARCHITECTURE - SOFTWARE DEVELOPERS VOLUME 3 REV 2.3











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов