manualshive.com logo in svg

Intel ITANIUM ARCHITECTURE - SOFTWARE DEVELOPERS VOLUME 3 REV 2.3, Руководство пользователя, Страница: 596 / 1898

Поделиться
Скачать
Intel ITANIUM ARCHITECTURE - SOFTWARE DEVELOPERS VOLUME 3 REV 2.3 Скачать руководство пользователя страница 596

2:348

Volume 2, Part 1: Processor Abstraction Layer

11.7.4.3.4 Disable PMC Virtualization

The PMC virtualization disable is controlled by the d_pmc bit in the Virtualization 
Disable Control (

vdc

) field in the VPD. When this control is set to 1, accesses 

(reads/writes) to the performance monitor configuration registers (PMCs) are not 
virtualized, and code running with PSR.vm==1 can read and write these resources 
directly without any intercepts to the VMM.

If this control is set to 0, accesses (reads/writes) to the performance counter 
configuration registers with PSR.vm==1 result in virtualization intercepts.

11.7.4.3.5 Disable MOV-to-PMD Virtualization

The MOV-to-PMD

1

 virtualization disable is controlled by the d_to_pmd bit in the 

Virtualization Disable Control (

vdc

) field in the VPD. When this control is set to 1, writes 

to the performance monitor data registers (PMDs) are not virtualized, and code running 
with PSR.vm==1 can write these resources directly without any intercepts to the VMM.

If this control is set to 0, writes to the performance monitor data registers with 
PSR.vm==1 result in virtualization intercepts.

11.7.4.3.6 Disable ITM Virtualization

The ITM virtualization disable is controlled by the d_itm bit in the Virtualization Disable 
Control (

vdc

) field in the VPD. When this control is set to 1, writes to the Interval Timer 

Match (ITM) register are not virtualized, and code running with PSR.vm==1 can write 
this resource directly without any intercepts to the VMM.

If this control is set to 0, writes to the ITM register with PSR.vm==1 result in 
virtualization intercepts.

11.7.4.3.7 Disable PSR Interrupt-bit Virtualization

The PSR interrupt-bit virtualization disable is controlled by the d_psr_i bit in the 
Virtualization Disable Control (

vdc

) field in the VPD. When this control is set to 1, 

accesses (reads/writes) to the interrupt bit in processor state register (PSR.i) are not 
virtualized. Code running with PSR.vm==1 can read and write to PSR.i through 

ssm

 and 

rsm

 instructions without any intercepts to the VMM. Attempts to modify other PSR bits 

in addition to the interrupt bit via the 

ssm

 and 

rsm

 instructions will result in 

virtualization intercepts.

This control has no effect on 

mov psr.l

 instructions; attempts to modify the interrupt 

bit with the mov psr.l instruction result in virtualization intercepts.

Note:

This field cannot be enabled together with a_int, a_from_psr or a_bsw virtual-
ization accelerations. If this control is enabled together with any one of 
described accelerations, an error will be returned during PAL_VP_CREATE and 
PAL_VP_REGISTER. See 

Section 11.7.4.4, “Virtualization Optimization Combi-

nations” on page 2:349

 for details.

1.

The MOV-from-PMD instruction is not virtualized. Hence there is no need to provide optimizations for
the MOV-from-PMD instruction.

Содержание ITANIUM ARCHITECTURE - SOFTWARE DEVELOPERS VOLUME 3 REV 2.3











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов