User’s Manual
i945G2-IQNAR User’s Manual
69
button momentarily (for less than 4 seconds) will switch the system to “suspend” mode.
2.7.13 Wake-Up by PCI card
The choices are “Enabled” and “Disabled”.
2.7.14 PowerOn by Ring
Select “Enabled” to power on the system from a soft off state by an input signal on the serial
Ring Indicator (RI) line. The choices are “Enabled” and “Disabled”.
2.7.15 USB KB Wake-Up From S3
When “Enabled”, enter any key to wake up the system from S3 state. The choices are
“Enabled” and “Disabled”.
2.7.16 Resume by Alarm
When “Enabled”, set the date and time at which the RTC (real-time clock) alarm awakens
the system from suspend mode. The choices are “Enabled” and “Disabled”.
2.7.17 Primary IDE 0 (1) and Secondary IDE 0 (1)
When Enabled, the system will resume from suspend mode if Primary IDE 0 (1) or
Secondary IDE 0 (1) becomes active. The choices are “Enabled” and “Disabled”.
2.7.18 FDD, COM, LPT PORT
When Enabled, the system will resume from suspend mode if the FDD, interface, COM port,
or LPT port is active. The choices are “Enabled” and “Disabled”.
2.7.19 PCI PIRQ [A-D]#
When Enabled, the system resumes from suspend mode if an interrupt occurs. The choices
are “Enabled” and “Disabled.
