manualshive.com logo in svg

Intel I7-900 DEKSTOP SPECIFICATION, Техническое описание, Страница: 11 / 98

Поделиться
Скачать
Intel I7-900 DEKSTOP SPECIFICATION Скачать руководство пользователя страница 11

Datasheet

11

Introduction

1

Introduction

The Intel

®

 Core™ i7-900 desktop processor Extreme Edition series and Intel

®

 Core™ 

i7-900 desktop processor series are intended for high performance high-end desktop, 
Uni-processor (UP) server, and workstation systems. The processor implements key 
new technologies:

• Integrated Memory Controller
• Point-to-point link interface based on Intel

®

 QuickPath Interconnect (Intel

®

 QPI). 

Reference to this interface may sometimes be abbreviated with Intel QPI 
throughout this document.

Note:

In this document the Intel

®

 Core™ i7-900 desktop processor Extreme Edition series 

and Intel

®

 Core™ i7-900 desktop processor series will be referred to as “the processor.”

This datasheet provides register descriptions for some of the registers located on the 
processor.

The processor is optimized for performance with the power efficiencies of a low-power 
microarchitecture to enable smaller, quieter systems.

The Intel

®

 Core™ i7-900 desktop processor Extreme Edition series and Intel

®

 Core™ 

i7-900 desktop processor series are multi-core processors, based on 45 nm process 
technology. Processor features vary by component and include up to two Intel 
QuickPath Interconnect point to point links capable of up to 6.4 GT/s, up to 8 MB of 
shared cache, and an integrated memory controller. The processors support all the 
existing Streaming SIMD Extensions 2 (SSE2), Streaming SIMD Extensions 3 (SSE3) 
and Streaming SIMD Extensions 4 (SSE4). The processor supports several Advanced 
Technologies: Execute Disable Bit, Intel

®

 64 Technology, Enhanced Intel SpeedStep

®

 

Technology, Intel

®

 Virtualization Technology (Intel

®

 VT), Intel

®

 Turbo Boost 

Technology, and Hyper-Threading Technology.

1.1

Terminology

A ‘#’ symbol after a signal name refers to an active low signal, indicating a signal is in 
the active state when driven to a low level. For example, when RESET# is low, a reset 
has been requested.

1.1.1

Processor Terminology

Commonly used terms are explained here for clarification:

• DDR3 — Double Data Rate 3 synchronous dynamic random access memory 

(SDRAM) is the name of the new DDR memory standard that is being developed as 
the successor to DDR2 SDRAM.

• Enhanced Intel SpeedStep

®

 Technology — Enhanced Intel SpeedStep 

Technology allows trade-offs to be made between performance and power 
consumption.

• Execute Disable Bit — Execute Disable allows memory to be marked as 

executable or non-executable, when combined with a supporting operating system. 
If code attempts to run in non-executable memory the processor raises an error to 
the operating system. This feature can prevent some classes of viruses or worms 
that exploit buffer over run vulnerabilities and can thus help improve the overall 

Содержание I7-900 DEKSTOP SPECIFICATION



































































































Отзывы:

Нет отзывов