45
Phoenix – AwardBIOS CMOS Setup Utility
Power User Overclock Settings
Item Help
CPU Clock Ratio 8 X
Auto Detect PCI/DIMM Clk Enabled
Spread Spectrum Disabled
*** Current Host/PCI Clock is 133/33 MHz ***
Host/PCI Clock at Next Boot 200/33 MHz
*** Current DRAM Clock is 267MHz ***
DRAM Clock at Next Boot By SPD(DDR533)
CPU Vcore Select Default
VCC1.
2
5V Select 1.
2
5V(Default)
VDIMM Select 1.85V(Default)
CPU Vcore 7-Shift Normal
Flash Part Write Protect Enabled
VCC 1.5V Output
1.
25
V(Default)
．．．．．
[ ]
1.55V
．．．．．
[ ]
1.60V
．．．．．
[ ]
1.65V
．．．．．
[ ]
1.70V
．．．．．
[ ]
1.80V
．．．．．
[ ]
1.90V
．．．．．
[ ]
2.00V
．．．．．
[ ]
↑↓
:Move ENTER:Accept ESC:Abort
Menu Level >
↑↓→←
Move Enter:/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
Host Clock at Next Boot
This item allows you to select CPU frequency step by step increasing.
The choice are: 533MHz CPU---133MHz~350MHz, 800MHz CPU---200MHz~350MHz
DRAM Clock at Next Boot
This item allows you select the DRAM Clock for DDR2 533/DDR2 400. The setting are:
By SPD, DDR2 533, DDR2 400
CPU Vcore 7-Shift
This item allows you select the CPU Vcore Voltage xx% more than the standard value, by
this function for the precise over-clocking for extra demanding of performance.
CPU Vcore Select
This item allows you select CPU Vcore Voltage by increase 0.0125V step by step from
0.8375V to 1.6V or the Default setting is Default (CPU manufacturer Default setting).
VCC 1.5V Output
This item allows you to select 1.5V of the AGP VGA card. The choice are: Default,
1.5V,1.55V,1.6V,1.65V,1.70V,1.80V,1.90V,2.00V.
VDIMM Output
This item allows you to select DRAM Voltage. The choice are: 1.80V,1.85V,1.90V,
2.00V,2.05V,2.10V,2.15V.
