38
UART2 Mode Select
This item allows you to determine which InfraRed(IR) function of the onboard I/O chip, this
functions uses.
Onboard Parallel Port
There is a built-in parallel port on the on-board Super I/O chipset that Provides Standard, ECP,
and EPP features. It has the following option:
Disabled
(3BCH/IRQ7)/
Line Printer port 0
(278H/IRQ5)/
Line Printer port 2
(378H/IRQ7)
Line Printer port 1
Parallel Port Mode
SPP
: Standard Parallel Port
EPP
: Enhanced Parallel Port
ECP
: Extended Capability Port
SPP/EPP/ECP/ECP+EPP
To operate the onboard parallel port as Standard Parallel Port only, choose “SPP.” To operate the onboard
parallel port in the EPP modes simultaneously, choose “EPP.” By choosing “ECP”, the onboard parallel
port will operate in ECP mode only. Choosing “ECP+EPP” will allow the onboard parallel port to support
both the ECP and EPP modes simultaneously. The ECP mode has to use the DMA channel, so choose the
onboard parallel port with the ECP feature. After selecting it, the following message will appear: “ECP
Mode Use DMA” at this time, the user can choose between DMA channels 3 to 1. The onboard parallel
port is EPP Spec. compliant, so after the user chooses the onboard parallel port with the EPP function, the
following message will be displayed on the screen: “EPP Mode Select.” At this time either EPP 1.7 spec.
or EPP 1.9 spec. can be chosen.
3-8 Power Management Setup
The Power Management Setup allows you to configure your system to most effectively save
energy saving while operating in a manner consistent with your own style of computer use.
Phoenix – AwardBIOS CMOS Setup Utility
Power Management Setup
Item Help
ACPI Function Enabled
ACPI Suspend Type
Power Management User Define
Video off Method V/H SYNC+Blank
Video Off In Suspend Yes
Suspend Type Stop Grant
MODEM Use IRQ 3
Suspend Mode Disabled
HDD Power Down Disabled
Soft-off by PWR-BTTN Instant-off
Wake-Up by PCI card Disabled
Power On by Ring Disabled
Wake-Up by USB KB from S3(S4) Disabled
PS2 KB/MS Wake-up from S3-S5 Disabled
Resume by Alarm Disabled
X Date (of Month)Alarm 0
X Time (hh:mm:ss)Alarm 0 : 0 :0
> PM Timer Reload Events Press Enter
Menu Level >
↑↓→←
Move Enter:/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
