Intel EtherExpress PRO 10+ ISA, Руководство по установке

Страница: 18 / 35

7 Installing the Intel EtherExpress PRO 10+ ISA Ethernet Adapter
Microsoft Windows NT 4.0 Workstation
7 Installing the Intel EtherExpress PRO 10+ ISA Ethernet
Adapter
Microsoft Windows NT
4.0 Workstation
Connecting to a Novell
NetWare 3.12 Server Requirements
• HP Vectra with Windows NT 4.0 Workstation.
• Intel EtherExpress PRO 10+ ISA Ethernet card and drivers disk version
3.50.
• Driver File: EPRO.SYS, version 3.66
• Microsoft Windows NT 4.0 Workstation media.
• Microsoft Windows NT 4.0 Service Pack 4 media.
• Novell NetWare 3.12 Server system that supports IPX network protocol.
• Novell IntranetWare Client for Windows NT v4.11b installation media.
Device Configuration
Procedure
1 With the HP Vectra turned off, install the Intel EtherExpress PRO 10+ ISA
adapter card into an ISA slot.
2 Connect network cable media to the PRO 10+ card.
3 Power on the machine and start in MS-DOS mode.
4 Insert the Intel driver disk, “EtherExpress Ethernet Drivers” and execute
“SOFTSET2.EXE”.
5 Select “CONFIGURE NIC” and verify the resource settings listed above
under the heading “Device Configuration”.
6 If changes are required, save those changes and exit.
7 Remove the Intel Software driver diskette and restart the system.
Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8
Interrupt 05 03 07
I/O Address 210 210 210