Intel DK200 Series, Руководство по началу работы

Страница: 43 / 82

9.0 Install Intelligent Device Platform XT Runtime on
Target Device
Before you
Begin
Prepare Host
System for Wind
River Software
Register Target
Device
Install Linux and
Wind River
Packages on
Host System
Install
Runtime on
Target Device
Build Runtime
on Host System
Put Runtime
Software on
Flash Drive
Connect
Hardware /
Connect Target
Device to Host
System
Update SPI
Firmware on
Target Device
Build Intelligent Device Platform XT Runtime Software on page 38 guided you through
building your runtime image and deploying it to a bootable USB flash drive. Update
SPI Firmware on Target Device - Conref Source walked you through updating the SPI
firmware on your Target Device. You will now install the runtime software on your
Target Device's SD drive. Complete these steps from the PuTTY Virtual Terminal
$HOME
screen on your Host System.
Note: The runtime software can be booted from the USB flash drive, but Intel recommends
installing the runtime components on the Target Device's hard drive.
What you need to do
1. To install the Intelligent Device Platform XT from the USB flash drive to the Target
Device SD drive, use the following command:
tgt=/dev/mmcblk0 /sbin/reset_media
2. Respond
yes
when prompted to
Restore the boot media to its factory
defaults
. This process could take as long as 25 minutes. Do not remove the USB
flash drive during this process. Upon completion, you will be prompted to log in.
Use
root
for both the login ID and password.
3. After the command completes, shut down the Target Device. Use the command:
poweroff
4. Wait for the Target Device power button light to turn off.
5. Remove the USB flash drive from the Target Device.
The Target Device is now loaded with the new runtime image and is ready to use.
Now that you know how to use the Development Kit, it is time to develop your own
gateway solution. See Table 1 on page 12 for a list of helpful technical documents.
Install Intelligent Device Platform XT Runtime on Target Device—Intel IoT Gateway
Development Kit DK200 Series
Intel
®
IoT Gateway Development Kit DK200 Series
April 2015 Getting Started Guide
Order No.: 330295-004 43