7.0
Build Intelligent Device Platform XT Runtime
Software
Put Runtime
Software on
Flash Drive
Update SPI
Firmware on
Target Device
Install Runtime
on Target
Device
Before you
Begin
Connect
Hardware /
Connect Target
Device to Host
System
v
Connect Target
Device to Host
System
Register Target
Device
Install Linux and
Wind River
Packages on
Host System
Build Runtime
on Host
System
Install Linux Packages and Wind River Linux Host Tools on the Host System
on page
30 guided you through installing the Wind River Host Tools and Intelligent Device
Platform XT software on your Host System. With the software installed, you are now
ready to develop the applications and runtime operating system that will run on your
Target Device. This guide does not cover application development. For guidance, see
on page 12.
This section explains how to build an Intelligent Device Platform XT runtime file
system and operating system. This runtime file system and operating system are built
on the Host System and then installed on the Target Device.
If you use Eclipse* or if you prefer a GUI-based development environment to build
your Target Device runtime file system and operating system, then see
Intelligent Device Platform Project Using Wind River Workbench
on page 51.
The steps in this section will take several hours to complete. If possible, begin these
steps at the end of the day and in a location that can be unattended so you can allow
the build process to run overnight.
What you need to do
Note:
You may have used different directory names when you created directories in
Directories and Confirm Disk Space
on page 23. If you used different names, replace
the directory names in the following steps with the names of the directories you
created.
1. Begin this procedure in your
Project
directory. Use the following command:
cd $HOME/Project
2. Use the Wind River Linux
configure
command to configure the build. See the
command below for a typical
configure
command. Use
configure --help
to
explore supported configuration options, and see the Wind River
®
Intelligent
Device Platform XT 2.0 – Programmer’s Guide, Part II (Key Related Tasks) for help
with generating your own keys and for additional configuration options and details.
Intel IoT Gateway Development Kit DK200 Series —Build Intelligent Device Platform XT Runtime
Software
Intel
®
IoT Gateway Development Kit DK200 Series
Getting Started Guide
April 2015
38
Order No.: 330295-004
