Installing and Replacing Server Board Components
22
Intel
®
Server Board S1200KP Product Guide
Installing and Removing a Processor
Instructions on how to install the processor on the Server Board are given below.
Installing a Processor
CAUTION
Before installing or removing a processor, make sure the AC power has been
removed by unplugging the power cord from the computer; the standby
power LED should not be lit (see Figure 3 on page 16). Failure to do so could
damage the processor and the board.
To install a processor, follow these instructions:
1.
Observe the precautions in "Before You Begin" in page 18.
2.
Unlatch the processor socket lever by pushing it down and away from the socket
(Figure 6, A, B).
Figure 6. Unlatch the Socket Lever
