Intel DBS1200KP, Руководство по эксплуатации продукта

Страница: 27 / 56

Installing and Replacing Server Board Components
18 Intel
®
Server Board S1200KP Product Guide
2 Installing and Replacing Server Board
Components
This chapter tells you how to:

Install the I/O shield

Install and remove the Server Board

Install and remove a processor

Install and remove memory

Install and remove a PCI Express* x16 card

Connect SATA drives

Connect to the internal headers

Connect chassis fan and power supply cables

Set the BIOS configuration jumper

Clear passwords

Replace the battery
Before You Begin
CAUTION
The procedures in this chapter assume familiarity with the general
terminology associated with personal computers and with the safety practices
and regulatory compliance required for using and modifying
electronic equipment.
Disconnect the computer from its power source and from any
telecommunications links, networks, or modems before performing any of
the procedures described in this chapter. Failure to disconnect power,
telecommunications links, networks, or modems before you open the
computer or perform any procedures can result in personal injury or
equipment damage. Some circuitry on the board can continue to operate even
though the front panel power button is off.
Follow these guidelines before you begin:

Always follow the steps in each procedure in the correct order.

Set up a log to record information about your computer, such as model, serial numbers,
installed options, and configuration information.

Electrostatic discharge (ESD) can damage components. Perform the procedures described in
this chapter only at an ESD workstation using an antistatic wrist strap and a conductive foam
pad. If such a station is not available, you can provide some ESD protection by wearing an
antistatic wrist strap and attaching it to a metal part of the computer chassis.