Intel D975XBX2 - Desktop Board Motherboard Скачать руководство пользователя страница 17

Страница: 17 / 106

Product Description

1.2

Online Support

To find information about…

Visit this World Wide Web site:

Intel Desktop Board D975XBX2
under “Desktop Board Products” or
“Desktop Board Support”

http://www.intel.com/design/motherbd

http://support.intel.com/support/motherboards/desktop

Available configurations for the
Desktop Board D975XBX2

http://developer.intel.com/design/motherbd/bx2/bx2_available.htm

Processor data sheets

http://www.intel.com/design/litcentr

ICH7-R/ICH7-DH addressing

http://developer.intel.com/design/chipsets/datashts

Custom splash screens

http://intel.com/design/motherbd/gen_indx.htm

Audio software and utilities

http://www.intel.com/design/motherbd

LAN software and drivers

http://www.intel.com/design/motherbd

1.3

Processor

The board is designed to support the following processors:

•

Intel Core 2 Extreme Processor in an LGA775 socket with a 1066 MHz system bus

•

Intel Core 2 Duo Processor in an LGA775 socket with a 1066 MHz system bus

•

Intel Pentium Processor Extreme Edition in an LGA775 socket with a 1066 or
800 MHz system bus

•

Intel Pentium 4 Processor Extreme Edition in an LGA775 socket with a 1066 MHz
system bus

•

Intel Pentium D Processor in an LGA775 socket with an 800 MHz system bus

•

Intel Pentium 4 Processor in an LGA775 socket with an 800 MHz system bus

See the Intel web site listed below for the most up-to-date list of supported
processors.

For information about…

Refer to:

Supported processors for the board

http://www.intel.com/design/motherbd/bx2/bx2_proc.htm

CAUTION

Use only the processors listed on web site above. Use of unsupported processors can
damage the board, the processor, and the power supply.

INTEGRATOR’S NOTE

This board has specific requirements for providing power to the processor. Refer to
Section 2.7.2.1 on page 63 for information on power supply requirements for this
board.

Содержание D975XBX2 - Desktop Board Motherboard











































































































Результаты поиска

Содержание D975XBX2 - Desktop Board Motherboard

Отзывы:

Intel D975XBX2 - Desktop Board Motherboard, Спецификация, Страница: 17 / 106

Результаты поиска

Содержание D975XBX2 - Desktop Board Motherboard

Отзывы: