Intel D975XBX2 - Desktop Board Motherboard Скачать руководство пользователя страница 13

Страница: 13 / 106

Product Description

Table 1. Feature Summary

(continued)

Expansion
Capabilities

•

Two PCI* Conventional bus add-in card connectors (SMBus routed to both PCI

Conventional bus add-in card connectors)

•

One Primary PCI Express x16 (electrical x16 or x8) bus add-in card connector

•

One Secondary PCI Express x16 (electrical x8) bus add-in card connector

•

One PCI Express x16 (electrical x4) bus add-in card connector

Hardware Monitor
Subsystem

•

Hardware monitoring and fan control ASIC

•

Voltage sense to detect out of range power supply voltages

•

Thermal sense to detect out of range thermal values

•

Three fan headers

•

Three fan sense inputs used to monitor fan activity

•

Fan speed control

•

Support for Product Environmental Control Interface (PECI)

1.1.2

Manufacturing Options

Table 2 describes the manufacturing options. Not every manufacturing option is
available in all marketing channels. Please contact your Intel representative to
determine which manufacturing options are available to you.

Table 2. Manufacturing Options

AMT

BIOS support for Intel

Active Management Technology (Intel

AMT)

ATAPI CD-ROM
Connector

A 1 x 4-pin ATAPI-style connector for connecting an internal ATAPI CD-ROM drive

to the audio mixer

Audio Subsystem

Intel High Definition Audio subsystem in one of the following configurations:

•

8-channel (7.1) audio subsystem with five analog audio outputs and two S/PDIF

digital audio outputs (coaxial and optical) using the SigmaTel* 9274D audio

codec

•

6-channel (5.1) audio subsystem with three analog audio outputs using the

Sigmatel 9227 audio codec

Auxiliary PCI
Express Graphics
Power Connector

Provides required additional power when using high power (75 W or greater) add-in

cards in either or both the Secondary PCI Express x16 (electrical x8) and the PCI

Express x16 (electrical x4) bus add-in card connectors

Discrete SATA
RAID Controller

•

Marvell* 88SE6145 SATA RAID controller

•

Four SATA connectors (in addition to the four SATA connectors on the

ICH7-R/ICH7-DH SATA interface)

IEEE-1394a
Interface

IEEE-1394a controller and two IEEE-1394a connectors: one back panel connector

and one front-panel header

MCH Fan Header

A 3-pin header for powering a fan for the Intel

82975X Memory Controller Hub

(MCH)

Processor Core
Power Connector

One of the following connectors for pro12 V power to the processor voltage

regulator:

•

2 x 4-pin (requires a power supply with a dual-rail 2 x 4 power cable). Boards

equipped with the 2 x 4-pin processor core power connector will also include

heatsinks in the processor voltage regulator area.

•

2 x 2-pin

SCSI Hard Drive
LED Header

Allows add-in hard drive controllers (SCSI or other) to use the same LED as the

onboard IDE controller

Trusted Platform
Module (TPM)

A component that enhances platform security

Содержание D975XBX2 - Desktop Board Motherboard











































































































Результаты поиска

Содержание D975XBX2 - Desktop Board Motherboard

Отзывы:

Intel D975XBX2 - Desktop Board Motherboard, Спецификация, Страница: 13 / 106

Результаты поиска

Содержание D975XBX2 - Desktop Board Motherboard

Отзывы: