INTEL
®
CELERON® PROCESSOR SPECIFICATION UPDATE
92
The
Intel Architecture Software Developer's Manual, Vol
3
: System Programming Guide
Section
15.9.6
"
Programming the Performance Counters for Non-Retirement
Events"
page 15 - 37, Figure
15-12, first row currently states:
63
0
It should state:
31
0
The
Intel Architecture Software Developer's Manual, Vol 1:
Basic Architecture
Chapter 12, section 12.5.2 on
Figure 12-2 (I/O Permission Bit Map) currently states:
Last byte of bit map must be followed by a byte with all bits.
It should state:
Last byte of bit map must be followed by a byte with all bits set.
Also, in the lower left hand Conner of Figure 12-2
(I/O Permission Bit Map)
currently states:
Last I/O base map must be
It should state:
Last I/O base map must be less than or equal to DFFFH
C20. Figure 15-12 PEBS Record Format
EFLAGS
EFLAGS
C21. I/O Permission Bit Map