background image

Warranty 

Intel

®

 Entry Server Platform SR1325TP1-E User Guide  

 

53 

Warranty 

Limited Warranty for Intel

®

 Chassis Subassembly 

Products 

Intel warrants that the Products (defined herein as the Intel

® 

chassis subassembly and all of its 

various components and software delivered with or as part of the Products) to be delivered 
hereunder, if properly used and installed, will be free from defects in material and workmanship 
and will substantially conform to Intel’s publicly available specifications for a period of three (3) 
years after the date the Product was purchased from an Intel authorized distributor.  Software of any 
kind delivered with or as part of products is expressly provided “as is” unless specifically provided 
for otherwise in any software license accompanying the software. 

If any Product furnished by Intel which is the subject of this Limited Warranty fails during the 
warranty period for reasons covered by this Limited Warranty, Intel, at its option, will: 

• 

REPAIR the Product by means of hardware and/or software; OR 

• 

REPLACE the Product with another Product; OR 

• 

REFUND the then-current value of the Product if Intel is unable to repair or replace 
the Product. 

If such Product is defective, transportation charges for the return of Product to buyer within the 
USA will be paid by Intel.  For all other locations, the warranty excludes all costs of shipping, 
customs clearance, and other related charges.  Intel will have a reasonable time to make repairs or 
to replace Product or to refund the then-current value of the Product. 

In no event will Intel be liable for any other costs associated with the replacement or repair of 
Product, including labor, installation or other costs incurred by buyer and in particular, any costs 
relating to the removal or replacement of any product soldered or otherwise permanently affixed to 
any printed circuit board. 

This Limited Warranty, and any implied warranties that may exist under state law, apply only to the 
original purchaser of the Product. 

Extent of Limited Warranty 

Intel does not warrant that Products to be delivered hereunder, whether delivered stand-alone or 
integrated with other Products, including without limitation semiconductor components, will be 
free from design defects or errors known as “errata.”  Current characterized errata are available 
upon request. 

This Limited Warranty does not cover damages due to external causes, including accident, 
problems with electrical power, usage not in accordance with product instructions, misuse, neglect, 
alteration, repair, improper installation, or improper testing. 

Содержание C50277-001










































































Отзывы: