Intel BX80613I7980 Скачать руководство пользователя страница 72

Страница: 72 / 102

Signal Descriptions

Datasheet, Volume 1

DDR{0/1/2}_DQS_N[7:0]
DDR{0/1/2}_DQS_P[7:0]

I/O

Differential pair, Data Strobe x8. Differential strobes latch

data/ECC for each DRAM. Different numbers of strobes are

used depending on whether the connected DRAMs are x4 or

x8. Driven with edges in center of data, receive edges are

aligned with data edges.

DDR{0/1/2}_MA[15:0]

Selects the Row address for reads and writes, and the column

address for activates. Also used to set values for DRAM

configuration registers.

DDR{0/1/2}_ODT[3:0]

Enables various combinations of termination resistance in the

target and non-target DIMMs when data is read or written

DDR{0/1/2}_RAS#

Row Address Strobe.

DDR{0/1/2}_RESET#

Resets DRAMs. Held low on power up, held high during self

refresh; otherwise, controlled by configuration register.

DDR{0/1/2}_WE#

Write Enable.

ISENSE

Current sense from VRD11.1.

PECI

I/O

PECI (Platform Environment Control Interface) is the serial

sideband interface to the processor and is used primarily for

thermal, power, and error management. Details regarding the

PECI electrical specifications, protocols, and functions can be

found in the Platform Environment Control Interface

Specification.

PRDY#

PRDY# is a processor output used by debug tools to determine

processor debug readiness.

PREQ#

I/O

PREQ# is used by debug tools to request debug operation of

the processor.

PROCHOT#

I/O

PROCHOT# will go active when the processor temperature

monitoring sensor detects that the processor has reached its

maximum safe operating temperature. This indicates that the

processor Thermal Control Circuit has been activated, if

enabled. This signal can also be driven to the processor to

activate the Thermal Control Circuit. This signal does not have

on-die termination and must be terminated on the system

board.

PSI#

Processor Power Status Indicator signal. This signal is

asserted when maximum possible processor core current

consumption is less than 20 A. Assertion of this signal is an

indication that the VR controller does not currently need to be

able to provide I

above 20 A, and the VR controller can use

this information to move to a more efficient operation point.

This signal will de-assert at least 3.3 us before the current

consumption will exceed 20 A. The minimum PSI#

assertion and de-assertion time is 1 BCLK.

RESET#

Asserting the RESET# signal resets the processor to a known

state and invalidates its internal caches without writing back

any of their contents. Note that some PLL, QPI, and error

states are not effected by reset and only VCCPWRGOOD forces

them to a known state. For a power-on Reset, RESET# must

stay active for at least one millisecond after V

and BCLK

have reached their proper specifications. RESET# must not be

kept asserted for more than 10 ms while VCCPWRGOOD is

asserted. RESET# must be held de-asserted for at least 1 ms

before it is asserted again. RESET# must be held asserted

before VCCPWRGOOD is asserted. This signal does not have

on-die termination and must be terminated on the system

board. RESET# is a common clock signal.

SKTOCC#

SKTOCC# (Socket Occupied) will be pulled to ground on the

processor package. There is no connection to the processor

silicon for this signal. System board designers may use this

signal to determine if the processor is present.

TCK

TCK (Test Clock) provides the clock input for the processor

Test Bus (also known as the Test Access Port).

Table 5-1.

Signal Definitions (Sheet 2 of 4)

Name

Type

Description

Notes

Содержание BX80613I7980







































































































Результаты поиска

Содержание BX80613I7980

Отзывы:

Похожие инструкции для BX80613I7980

Бренды по названию

Популярные бренды

Intel BX80613I7980, Техническое описание

Результаты поиска

Содержание BX80613I7980

Отзывы:

Похожие инструкции для BX80613I7980

Бренды по названию

Популярные бренды