Intel BS-E098, Руководство пользователя

Страница: 55 / 131

Chapter 5 BIOS Setup
BS-E098 SERIES USER MANUAL Page: 5-5
BIOS Setup
Navigation Key
Description
<←> and <→> Select a different menu screen (move the cursor from the
selected menu to the left or right).
<↑> and <↓> Select a different item (move the cursor from the
selected item upwards or downwards)
<Enter> Execute the command or select the sub-menu.
<F2> Load the previous configuration values.
<F3> Load the default configuration values.
<F4> Save the current values and exit the BIOS setup menu.
<Esc> Close the sub-menu.
Trigger the confirmation to exit BIOS setup menu.
BIOS Messages
This section describes the alert messages generated by the board’s BIOS. These
messages would be shown on the monitor when certain recoverable errors/events
occur during the POST stage. The table bellow gives an explanation of the BIOS alert
messages:
BIOS Message Explanation
A first boot or NVRAM
reset condition has been
detected. BIOS has been updated or the battery was replaced.
The CMOS defaults
were loaded. Default values have been loaded after the BIOS was
updated or the battery was replaced.
The CMOS battery is
bad or has been recently
replaced. The battery may be losing power and users should
replace the battery immediately. Also, this message is
displayed once the new battery is replaced.