Intel BS-E098, Руководство пользователя

Страница: 130 / 131

Appendix B Technical Summary
BS-E098 SERIES USER MANUAL
Page: B-28
III. BIOS Update Procedure
1
Use the bootable USB storage to boot up the system into the
DOS command prompt.
2
Type "AfuEfix64 B981xxxx.bin /p /b /n /x” and press Enter to
start the flash procedure.
(Note that xxxx means the BIOS revision part, e.g. 0PD1…)
3
During the BIOS update procedure, you will see the BIOS update
process status and its percentage. Beware! Do not turn off the
system power or reset your computer when the entire update
procedure are not complete; otherwise, the BIOS ROM may be
crashed and the system will be unable to boot up next time.
4
After the BIOS update procedure is completed, the following
messages will be shown:
5
Restart the system and boot up with the new BIOS
configurations.
6
The BIO Update is completed after the system is restarted.
7
Reboot the system and verify if the BIOS version shown on the
initialization screen has been updated.