manualshive.com logo in svg

Intel Agilex, Руководство пользователя по настройке, Страница: 35 / 196

Поделиться
Скачать
Intel Agilex Скачать руководство пользователя страница 35

2.5.3.2. Enabling Dual-Purpose Pins

AVST_CLK

, 

AVST_DATA[15:0]

, 

AVST_DATA[31:16]

, 

AVST_READY

, and 

AVST_VALID

 are dual-purpose pins. Once the

device enters user mode these pins can function either as GPIOs or as tri-state inputs.

If you use these pins as GPIOs, make the following assignments:
•

Set V

CCIO

 of the I/O bank at 1.2 V

•

Assign the 1.2 V I/O standard to these pins

Complete the following steps to assign these settings to the dual-purpose pins:
1. On the Assignments menu, click Device.
2. In the Device and Pin Options dialog box, select the Dual-Purpose Pins category.
3. In the Dual-purpose pins table, set the pin functionality in the Value column.

4. Click OK to confirm and close the Device and Pin Options

Attention: When you use the Avalon ST configuration scheme the dual-purpose Avalon ST pins have the following

restrictions:

•

You cannot use the Avalon-ST interface for partial reconfiguration (PR).

•

You cannot use the Avalon-ST pins in user mode in designs that include the HPS. This restriction means that you

cannot use the Avalon-ST as dual-purpose I/Os in designs that include the HPS.

2. Intel Agilex Configuration Details

UG-20205 | 2019.10.09

Send Feedback

Intel

®

 Agilex

™

 Configuration User Guide

35

Содержание Agilex





































































































































































































Отзывы:

Нет отзывов