Intel Agilex Скачать руководство пользователя страница 136

Страница: 136 / 196

Command

Code

(Hex)

Command

Length

(9)

Response

Length

(9)

Description

RSU_STATUS

Reports the current remote system upgrade status. You can use this command to check the

configuration status during configuration and after it has completed. This command returns the

following responses:

Word

Summary

Description

0-1

Current image

Flash offset of the currently running application image.

2-3

Failing image

Flash offset of the highest priority failing application

image. If multiple images are available in flash memory,

stores the value of the first image that failed. A value of

all 0s indicates no failing images. If there are no failing

images, the remainder of the remaining words of the

status information do not store valid information.

State

Failure code of the failing image.
The error field has two parts:
• Upper 16 bits: Major error code.
• Lower 16 bits: Minor error code.
Returns 0 for no failures. Refer to the

Table 36

on page

139 and

Table 37

on page 140 for more information.

Error Reporting and

Version

Starting with version 19.3 of the Intel Quartus Prime Pro

Edition software, contains the following fields:
• Bits[31:16]: Source of error. The following encodings

are valid:
— 0x0000: No error
— 0x0ACF: Application firmware reported an error
— 0x0DCF: Decision firmware reported an error

• Bits[15:0]: RSU interface version. The following

encodes are valid:
— 0x0000: Pre 19.3 release
— 0x0001: 19.3 release

Error location

Stores the error location of the failing image. Returns 0

for no errors.

Error details

Stores the error details for the failing image. Returns 0 if

there are no errors.

continued...

(9)

This number does not include the command and response header.

4. Remote System Update (RSU)

UG-20205 | 2019.10.09

Intel

Agilex

™

Configuration User Guide

Send Feedback

136

Содержание Agilex





































































































































































































Результаты поиска

Содержание Agilex

Отзывы:

Intel Agilex, Руководство пользователя по настройке, Страница: 136 / 196

Результаты поиска

Содержание Agilex

Отзывы: