Intel AFCSASRISER Скачать руководство пользователя страница 93

Страница: 93 / 192

Intel

RAID Software User’s Guide

•

Disk Cache Policy:

The cache policy applies to the cache on physical drives of the

current array.

— Enable: Enable disk cache. Enabling the disk cache in Write-back mode provides

little or no performance enhancement, while the risk of data loss due to power failure

increases.

— Disable: Disable disk cache.
— NoChange: Leave the default disk cache policy unchanged.

•

Disable BGI:

Enable or disable background initialization. Set this option to “Yes” to

disable background initialization.

•

Select Size:

Set the size of the virtual drive in megabytes. The right pane of the virtual

drive configuration window lists the maximum capacity that can be selected, depending

on the RAID level chosen.

Creating a Hot Spare

To create a hot spare, follow these steps:

1. On the main screen, select the drive that should be used as the hot spare.

Figure 33. Intel

RAID BIOS Console 2 – Choosing a Hot Spare Drive

2. Select the disk group.

Содержание AFCSASRISER

































































































































































































Результаты поиска

Содержание AFCSASRISER

Отзывы:

Intel AFCSASRISER, Руководство пользователя, Страница: 93 / 192

Результаты поиска

Содержание AFCSASRISER

Отзывы: