Intel AFCSASRISER Скачать руководство пользователя страница 47

Страница: 47 / 192

Intel

RAID Software User’s Guide

Intel

RAID Drivers

The drivers that Intel provides for Intel

RAID Controllers are not compatible with SCSI or

SATA-only RAID controllers. The RAID driver files are available on the

Resource CD

that

accompanies the RAID controllers. The driver files are also available at

http://downloadcenter.intel.com.

If you need to transfer the driver files to another system, you

can copy them to a floppy disk or a USB key.

Note:

Intel updates software frequently and updated drivers may provide additional features. Check for

new software at the Intel Web site:

http://www.intel.com/support/motherboards/server/

. See the

Readme file that accompanies the download for updated information. For operating systems that

are not listed here, but are listed at the above Intel Web site see Readme file that accompanies the

download for installation steps.

RAID Driver Installation for Microsoft Windows*

Installation in a New Microsoft Windows* Operating System

This procedure installs the RAID device driver system during the Microsoft Windows 2003*,

Microsoft Windows 2000*, or Microsoft Windows XP* operating system installation. The

system must contain an Intel

RAID controller. Microsoft Windows 2003* automatically adds

the driver to the registry and copies the driver to the appropriate directory.

1. Start the Microsoft Windows* installation by booting from the Microsoft Windows*

CD-ROM disk. The system BIOS must support booting from a CD-ROM drive. You

may need to change BIOS settings to allow CD-ROM booting. See your system

documentation for instructions.

2. Press <F6> to install when the screen displays:

Press F6 if you need to install...

Note:

You must press <F6> for the system to recognize the new driver.

3. Choose <S> to specify an additional device when the screen displays:

Setup could not determine the type...

Note:

If this screen is not displayed as the first user input, then the setup program did not

register that the <F6> key was pressed. Reboot the system and return to step 2.

4. When the system asks for the manufacturer-supplied hardware support disk, insert the

Microsoft Windows* driver disk and press <Enter>.

5. Select the appropriate Microsoft Windows* driver from the menu by highlighting it.

Press <Enter> to proceed. The driver is added to the registry and copied to the

appropriate directory.

6. Continue with the Microsoft Windows* operating system installation procedure.

Содержание AFCSASRISER

































































































































































































Результаты поиска

Содержание AFCSASRISER

Отзывы:

Intel AFCSASRISER, Руководство пользователя, Страница: 47 / 192

Результаты поиска

Содержание AFCSASRISER

Отзывы: