Intel AFCSASRISER Скачать руководство пользователя страница 82

Страница: 82 / 192

Intel

RAID Software User’s Guide

4. Choose the configuration method and click Next.

Figure 21. Intel

RAID BIOS Console 2 - Configuration Methods

The following configuration methods options are provided:

— Automatic Configuration

There are two options in Redundancy.

Redundancy When Possible

Redundancy

Redundancy When Possible

configures configures RAID 1 for systems with two

drives or RAID 5 for systems with three or more drives, or RAID 6 for systems with

three or more drives. All available physical drives are included in the virtual drive

using all available capacity on the disks.
No Redundancy configures all available drives as a RAID 0 virtual drive.
There is a

Drive Security Method

option which is reserved to be enabled in future.

Note:

You must designate hot-spare drives before starting auto configuration using all

available capacity on the disks.

— Manual Configuration

Allows you to configure the RAID mode.

Note:

Automatic Configuration cannot be used for RAID 10, 50, or 60 or with mixed SATA and SAS drives.

Содержание AFCSASRISER

































































































































































































Результаты поиска

Содержание AFCSASRISER

Отзывы:

Intel AFCSASRISER, Руководство пользователя, Страница: 82 / 192

Результаты поиска

Содержание AFCSASRISER

Отзывы: