Intek MX-825U, Инструкция по эксплуатации

Страница: 19 / 48

Auxiliary Functions
- 18 -
English
AUXILIARY FUNCTIONS
Busy Channel Lockout
This function prevents interferences of other incoming signals. If the selected channel is busy and the
Busy Channel Lockout function has been enabled, the trasmission is disabled.
When this function is enabled and the selected channel is Busy, if user press PTT Key (16), an alarm
will be emitted.
Note : This function is programmable by using the PC software.
LCD and Keypad Backlight
Enter the MENU Mode and select the BRIGHT function setup. Press MENU Key (4) to confirm and use
the Rotary Switch to select the AUTO, OFF or ON options.
AUTO : The display LCD and Keypad backlight will be enables if any key is pressed and will be disabled
after 10 seconds if no keys are pressed.
ON : The display LCD and Keypad backlight will be enabled.
OFF : The display LCD and Keypad backlight will be disabled.
Confirm the selection by pressing the MENU Key (4) and press the EXIT Key (6) to return to Stand-by
Mode.
SCRAMBLER Function
This function is not available on this model.
COMPANDER Function
This function allows to obtain a stronger, clear and clean audio signal and it is a great help in noisy
areas and in case of weak signals or in long distance communication.
To enable the COMPANDER function please proceed as follows :
Enter the MENU Mode and select the
COMPAND function setup. Press MENU Key (4) to confirm and
use the Rotary Switch to select the OFF (function disabled) or ON (function enabled) options.
Confirm the selection by pressing the MENU Key (4) and press the EXIT Key (6) to return to Stand-by
Mode.
Emphasis Function
Enter the MENU Mode and select the EMPH function setup. Press MENU Key (4) to confirm and use
the Rotary Switch (4) to select the OFF (function disabled) or ON (function enabled) options.
Confirm the selection by pressing the MENU Key (4) and press the EXIT Key (6) to return to Stand-by Mode.
SOS Function
Press and hold the EXIT key (6) to turn ON (function enabled) or OFF this function. After SOS signal is sent, it
issues a roger beep “DI”.
Options can be programmed by using PC software :
A. Local alarm (alarm time can be set via software)
B. Transmit ENI and background sound (no local alarm)
C. Transmit ENI and alarm sound (no local alarm)
D. Transmit ENI and alarm sound (with local alarm)