Integral Technologies FlashPoint 128 CPCI, Руководство пользователя

Страница: 55 / 92

58
FPG Features (Cont.)
Grab Setup Menu
This control panel sets the video input parameters for
the video capture.
Brightness, Contrast
Sets the relative level of brightness and contrast for the
video input during a video capture. In most
instances of a video capture with flash, the
brightness and contrast will be set to the same
values as the Video Control Panel values.
Field Delay (used only with flash grab)
Sets the value for the number of video fields that pass
after the flash is triggered before a video grab
occurs. Typically this value is set at 1 or 2.
Line Delay (used only with flash grab)
Sets the value for the number of video lines to delay,
after the correct field value has been set (above),
before the flash is triggered. Typically this value is
set to 0.
Align
Sets the parameter for the first video field to be
captured when a video capture is triggered.
Even - captures an EVEN/ODD video frame.
Odd - captures an ODD/EVEN video frame.
Any - captures the next video frame.
Type
Sets the parameters for the type of flash unit connected.
None - no flash unit connected
Universal - triggers any standard photographic flash unit
Strobe - uses an external flash sensor connected to the input trigger
to signal a grab
AutoSync -
is the setting used to synchronize with a 3rd party
proprietary camera
Reset
Resets to factory programmed default values.