Integra DTR-60.5, Инструкция по эксплуатации

Страница: 76 / 112

Advanced Operations
En-76 Operating procedure (
➔
page 59 )
■
Headphone Level
`
–12dB to 0dB to +12dB
With this setting, you can specify the headphone
volume relative to the main volume. This is useful if
there’s a volume difference between your speakers
and your headphones.
OSD Setup
■
On Screen Display
`
On
`
Off
This preference determines whether operation details
are displayed on-screen when an AV receiver
function is adjusted.
Even when “
On ” is selected, operation details may
not be output if the input source is connected to an
HDMI IN .
■
Language
(North American models)
`
English , Deutsch, Français, Español, Italiano,
Nederlands, Svenska ,
中文
(Australian models)
`
English , Deutsch, Français, Español, Italiano,
Nederlands, Svenska,
Русский язык
,
中文
This setting determines the language used for the on-
screen menus.
■
Screen Saver
`
3min, 5min, 10min
`
Off
With this setting, you can set the time until the screen
saver activates itself. Once active, the screen saver
will go off and the screen will return to its previous
state if the AV receiver is operated in any way.
12V Trigger A/B/C Setup
Depending on their type, when some components are
turned by using triggers A, B, and C, a large amount
of current may be drawn at once. To prevent this, you
can delay each trigger signal individually. Another
application of trigger delay is to eliminate the “thump”
noise that’s sometimes heard when a source
component is turned on.
You can accomplish this by delaying the trigger signal
for your power amplifier, so that it’s the last
component to be turned on.
■
Delay
`
0sec , 1sec , 2sec , 3sec :
When “ 0sec ” is selected, the trigger signal is
output as soon as the input source is changed.
Note
• By default, “ 12V Trigger A Setup ” is set to “ 0sec ”, “ 12V
Trigger B Setup ” to “ 1sec ”, and “ 12V Trigger C Setup ” to
“ 2sec ”.
• Use a miniplug cable to connect the AV receiver’s 12V
TRIGGER OUT A , B , or C jack to the 12 V trigger input of
a connected component.
■
BD/DVD, CBL/SAT, STB/DVR, GAME1, PC, AUX,
TUNER, TV/CD, PHONO, NET, USB
`
Off :
No trigger signal is output.
A 12-volt trigger signal is output when the connected
component is selected as the source for:
`
Main , Zone 2 , Main/Zone 2 , Zone 3 , Main/Zone
3 , Zone 2/Zone 3 , Main/Zone 2/Zone 3
Note
• By default, all input sources on the “ 12V Trigger A Setup ”
menu are set to “ Main ”, those on “ 12V Trigger B Setup ”
are set to “ Main/Zone 2/Zone 3 ”, and those on “ 12V
Trigger C Setup ” are set to “ Zone 2 ”.
■
GAME2
`
Off :
No trigger signal is output.
A 12-volt trigger signal is output when the connected
component is selected as the source for:
`
Main , Zone 2 , Main/Zone 2
Note
• By default, “ GAME2 ” input source on the “ 12V Trigger A
Setup ” menu are set to “ Main ”, those on “ 12V Trigger B
Setup ” are set to “ Main/Zone 2 ”, and those on “ 12V
Trigger C Setup ” are set to “ Zone 2 ”.
■
BLUETOOTH
`
Off :
No trigger signal is output.
A 12-volt trigger signal is output when the connected
component is selected as the source for:
`
Main
Note
• By default, “ BLUETOOTH ” input source on the “ 12V
Trigger A Setup ” menu and that on “ 12V Trigger B Setup ”
menu are set to “ Main ”, and that on “ 12V Trigger C Setup ”
is set to “ Off ”.