2. To initialize the unit
This device employs a microprocessor to perform various
functions and operations. If interference generated by an external
power supply, radio wave, or other electrical source results in
accident which causes the specified operations and functions to
operate abnormally.
To perform a result, please follow the procedure below.
1.Press and hold down the VIDEO-1 button, then press the
STANDBY/ON button.
2.After "CLEAR" is displayed, the preset memory and each
mode stored in the memory, such as surround, are
initialized and will return to the factory setting.
3. Unplug the power supply cord.
(U.S.A. model only)
After correcting the original service problem, perform the
following safety check before releasing the set to the customer.
Leakage Current Check
Measure leakage current to a known earth ground(water pipe,
conduit, etc.) by connecting a leakage current tester between
the earth ground and exposed metal parts of the appliance
(input/output terminals, screwheads,metal overlays, etc.).
Plug the power supply cord directly into a 120V AC 60 Hz outlet
and turn Standby switch on. Any current meausred must not
exceed 0.5mA.
1. Replacing the fuses
This symbol located near the fuses indicates that the
fuse used is fast operating type. For continued protection against
fire hazard, replace with same type fuse. For fuse rating refer to
the marking adjacent to the symbol.
Ce symbole indique que le fusible utlise est a rapide.
Pour une protection permanente, n'untiliser que fusibles de
meme type. Ce darnier est la qu le present symbol est
appse.
CIRCUIT NO. PART NO. DESCRIPTION
Note: <D>:120V model only
<A>: Australian model only
F6901,F6902
252303 or
15A-TUL-250V or
252197
15A-UL/T-314,Fuse
F901
252196 or
12A-UL/T-314 or
252301
12A-TUL-250V <D>
F902
252079 or
6.3A-SE-EAK or
252245 or
6.3A-SE-TL250V or
252279
6.3A-SE-TL250V,Fuse <A>
F903
252164 or
5A-UL/T-237 or
252258
5A-T/UL-ST2 <D>
252075 or
2.5A-SE-EAK or
252241 or
2.5A-SE-TL250V or
252275
2.5A-SE-TL250V <A>
F9501 252160
or
2.5A-UL/T-237
or
252254
2.5A-T/UL-ST2,Fuse <D>
252075 or
2.5A-SE-EAK or
252241 or
2.5A-SE-TL250V or
252275
2.5A-SE-TL250V <A>
DTR-6.5
SERVICE PROCEDURES
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299