DTR-6.5
4. Operation check of voltage sensor and thermal protector
1. Enter Test-4 mode.
2. Press and release the right arrow key repeatedly until "TEST-4-36" is shown on the front display.
3. Confirm that the FM STEREO indicator lights on and the relays of RL6901 and RL6902 turn OFF.
4. Press the right arrow key to set "TEST-4-37".
5. Confirm that the FM STEREO indicator lights on and the relays of RL6901 and RL6902 turn OFF.
6. Exit from the test mode.
7. Connect a metal oxide resistor 1.8 kohm/1W between "COM" and "TH2" terminals of P6302 with no input signal.
8. Set the unit to the test mode "TEST-1-00".
9. Confirm that "Thermal Protect" is displayed on the front display.
Test Mode of FL tube
To enter a test mode (Test 1 to 4), when the unit is turned on,
hold down "CD" + "DISPLAY" buttons and then press "STANDBY/ON" button.
After "TEST " on the FL tube is displayed, press CD button to set the unit to the test mode of FL tube.
The segments of even
All segments
light on.
"FEDCBA98765
43210" light on.
Test mode of FL tube
....UP
......DOWN
a:Tuner "U":USA and Canada "E":Europe "W":Worldiwde "J":Japan
" ":avaiable b:Amplifier ch, "5":5 ch "7":7 ch
c:4 ohm correspondence "4":Yes "6":No
d:Input numbers e:Front video: "F":Yes "N":No
f:Phono: "P":avaiable
g:Video converer function: "C":avaiable
number light on .
h:TV format function :"N":NTSC "P":PAL/NTSC
i:Setup mic. function :"Y":avaiable
j:Pure audio function : "P":avaiable
k:Multi-ch. function "M":avaiable
l: Zone 2 output function "L":LINE "P": LINE/Preout
m12V trigger function:"Z":ZONE2 "A":A/B/C
n:IR input function:"i":Yes o:RS232C function:"R":Yes
Note: All functions " ": No avaiable
UP
direction
DOWN
direction
Right arrow key
Left arrow key
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
