background image

92

En

Server playback

The AV receiver can play digital music files stored on a 
computer or media server and supports the following 
technologies:
• Windows Media Player 11 
• Windows Media Player 12
• Windows Media Connect 2.0
• DLNA-certified media server
If the operating system of your computer is Windows 
Vista, Windows Media Player 11 is already installed.
Windows Media Player 11 for Windows XP can be 
downloaded for free from the Microsoft web site.
• The computer or media server must be on the same 

network as the AV receiver.

• Each folder may contain up to 20000 music files, and 

folders may be nested up to 16 levels deep.

Note

• Depending on the media server, the AV receiver may not 

recognize it, or may not be able to play its music files.

Remote playback

• Windows Media Player 12
• DLNA-certified (within DLNA Interoperability 

Guidelines version 1.5) media server or controller 
device.

Setting varies depending on the device. Refer to your 
device’s instruction manual for details.
If the operating system of your personal computer is 
Windows 7, Windows Media Player 12 is already 
installed. For more information, see the Microsoft web 
site.

• USB mass storage device class (but not always 

guaranteed). 

• FAT16 or FAT32 file system format.
• If the storage device has been partitioned, each section 

will be treated as an independent device.

• Each folder may contain up to 20,000 music files and 

folders, and folders may be nested up to 16 levels deep.

• USB hubs and USB devices with hub functions are not 

supported.

Note

• If the media you connect is not supported, the message “

No 

Storage

” will appear on the display.

• If you connect a USB hard disk drive to the AV receiver’s 

USB

 

port, we recommend that you use its AC adapter to power it.

• The AV receiver supports USB MP3 players that support the 

USB Mass Storage Class standard, which allows USB devices to 
be connected to computers without the need for special drivers 
or software. Note that not all USB MP3 players support the USB 
Mass Storage Class standard. Refer to your USB MP3 player’s 
instruction manual for details.

• Protected WMA music files on an MP3 player cannot be played.
• Onkyo accepts no responsibility whatsoever for the loss or 

damage to data stored on a USB device when that device is used 
with the AV receiver. We recommend that you back up your 
important music files beforehand.

• MP3 players containing music files that are managed with 

special music software are not supported.

• Operation is not guaranteed for all USB devices, which includes 

the ability to power them.

• Do not connect your USB device via a USB hub. The USB 

device must be connected directly to the AV receiver’s 

USB

 

port.

• If the USB device contains a lot of data, the AV receiver may 

take a while to read it.

• USB devices with security functions cannot be played.

Server Requirements

Minimum system requirements for Windows Media 
Player 11 on Windows XP
Operating system

Windows XP Home Edition (SP2), Windows XP 
Professional (SP2), Windows XP Tablet PC Edition 
(SP2), Update Rollup 2 for Windows XP Media Center 
Edition 2005 (KB900325), October 2006 Update Rollup 
for Windows XP Media Center Edition (KB925766)

Processor:

233 MHz Intel Pentium II, Advanced 
Micro Devices (AMD), etc.

Memory:

64 MB

Hard disk:

200 MB of free space

Drive: 

CD or DVD drive

Modem: 

28.8 kbps

Sound card: 

16-bit sound card

Monitor:

Super VGA (800 x 600)

Video card:

64 MB VRAM, DirectX 9.0b

Software:

Microsoft ActiveSync (only when 
using a Windows Mobile-based 
Pocket PC or smartphone)

Web browser:

Microsoft Internet Explorer 6 or 
Netscape 7.1

USB Device Requirements

Содержание DTR-40.3

































































































Отзывы: