Integra DTR-4.9, Инструкция по эксплуатации

Страница: 42 / 84

42
First Time Setup —Continued
When an input source is selected, the AV receiver checks
the relevant audio inputs for the presence of an audio
signal and automatically selects an input. With this set-
ting, you can specify which audio inputs the AV receiver
will check for signals.
Note:
• You can select a different option for each input selec-
tor.
Automatic Audio Input Selection
Setup
1
Press the input selector button
for the input selector whose set-
ting you want to change.
The setting for the TUNER input selec-
tor cannot be changed and is fixed at
“Analog.”
2 Press and hold the [Enter]
button.
The current setting is displayed.
1
2, 3
3 Press the [Enter] button repeat-
edly to select an option.
HDMIx (Auto):
This option can be selected when an
HDMI input is assigned to an input
selector (page 39). When this option is
selected, the relevant HDMI, digital,
and analog inputs will be checked for
the presence of an audio signal. If sig-
nals are present at more than one input,
the inputs will be selected in the follow-
ing order of priority: HDMI, digital,
analog.
COAXx/Auto:OPTx (Auto):
This option can be selected when a dig-
ital input is assigned to an input selector
(page 40). When this option is selected,
the relevant digital and analog inputs
will be checked for the presence of an
audio signal. If signals are present at
more than one input, the inputs will be
selected in the following order of prior-
ity: digital, analog. Any audio signals
present at the HDMI inputs will not be
output.
Analog:
When this option is selected, the signal
from the relevant analog audio input is
output. Any audio signals present at
HDMI or digital inputs will not be out-
put.
DTR-4.9̲En.book Page 42 Tuesday, April 15, 2008 5:13 PM