Integra DTR-4.9 Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 84

background image

27

Connecting Your Components

—Continued

About HDMI

Designed to meet the increased demands of digital TV, HDMI (High Definition Multimedia Interface) is a new digital
interface standard for connecting TVs, projectors, DVD players, set-top boxes, and other video components. Until now,
several separate video and audio cables have been required to connect AV components. With HDMI, a single cable can
carry control signals, digital video, and up to eight channels of digital audio (2-channel PCM, multichannel digital
audio, or multichannel PCM).

The HDMI video stream (i.e., video signal) is compatible with DVI (Digital Visual Interface),

*1

so TVs and displays

with a DVI input can be connected by using an HDMI-to-DVI adapter cable. (This may not work with some TVs and
displays, resulting in no picture.)

The AV receiver uses HDCP (High-bandwidth Digital Content Protection), so only HDCP-compatible components will
display a picture.

Supported Audio Formats

• 2-channel linear PCM (16/20/24 bit/32–192kHz)

• Multichannel linear PCM (7.1 ch, 32–192kHz)

• Bitstream (Dolby Digital, Dolby Digital Plus, DTS)

Your DVD player must be able to output these formats from its HDMI OUT.

About Copyright Protection

The AV receiver supports HDCP (High-bandwidth Digital Content Protection),

*2

a copy-protection system for digital

video signals. Other devices connected to the AV receiver via HDMI must also support HDCP.

Use a commercially available HDMI cable (supplied with some components) to connect the AV receiver’s HDMI OUT
to the HDMI input on your TV or projector.

*1 DVI (Digital Visual Interface): The digital display interface standard set by the DDWG

*3

in 1999.

*2 HDCP (High-bandwidth Digital Content Protection): The video encryption technology developed by Intel for HDMI/DVI. It’s designed to

protect video content and requires a HDCP-compatible device to display the encrypted video.

*3 DDWG (Digital Display Working Group): Led by Intel, Compaq, Fujitsu, Hewlett Packard, IBM, NEC, and Silicon Image, this open

industry group’s objective is to address the industry's requirements for a digital connectivity specification for high-performance PCs and
digital displays.

Connecting Components with HDMI

The AV receiver’s HDMI interface is based on the following standard:

Repeater System, x.v. Color, Lip Sync, Dolby Digital Plus, and Multichannel PCM

«
...
25
26
27
28
29
...
»

Содержание DTR-4.9





















































































Отзывы:

Нет отзывов

Похожие инструкции для DTR-4.9

Бренд: Strong Страницы: 25

Бренд: Alpine Страницы: 48

Бренд: Soundstream Страницы: 31

Бренд: Webasto Страницы: 88

Бренд: Muzak Страницы: 3

Бренд: TV Star Страницы: 10

Бренд: Dat Viet Страницы: 18

Бренд: D+M Group Страницы: 24

A1560 SONIC Series

Бренд: ACS Страницы: 20

Бренд: Manta Страницы: 20

Бренд: Maxon Страницы: 42

Бренд: TYT Страницы: 48

Бренд: Audio System Страницы: 2

IN-Command AVR-X4000

Бренд: Denon Страницы: 224

Бренд: ZiFiSense Страницы: 11

Бренд: Hyundai Страницы: 22

Бренд: Vantage Hearth Страницы: 60

Бренд: Icom Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды